| DMD Panel*1 |
1chip DMD (0.7")reflection,
1,024 x 768
NEC
WT600 DMD Projectors |
| Lamp |
220W DC (Normal Mode)/176W(Eco
Mode) |
| Lamp Life*2 |
2,000H (Normal Mode)/3,000H (Eco
Mode) |
| Image Size |
40inch to 100inch (Projection
Distance:0.064m to 0.659m) |
| Light Output |
2,500 Lumens (Nomal Mode)/2,000
Lumens (Eco Mode)*3 |
| Maximum Resolution |
UXGA (1,600 x 1,200) with
Advanced AccuBlend |
| Contrast Ratio |
3,000:1 |
| Optical Unit |
Aspheric mirror x 4 |
| Synchronization Range |
Horizontal |
15kHz to 100kHz(RGB:24kHz or
over) |
| Vertical |
50Hz to 120Hz |
| Video Bandwidth |
RGB:80MHz |
| Horizontal Resolution |
540TV Lines:NTSC/NTSC
4.43/PAL/Y·Cb·Cr |
| 300TV Lines:SECAM |
Colour Reproduction
NEC
WT600 DMD Projectors |
Full Colour, 16.77Million Colour
Simultaneously
NEC
WT600 DMD Projectors |
| Input Terminals |
1DVI-I |
1DVI-I 29pin |
RGBHV (Digital) |
T.M.D.S Specifications VGA, SVGA, XGA, SXGA |
| RGBHV (Analogue) |
VGA, SVGA, XGA, SXGA (with Advanced
accuBlend), UXGA (with Advanced accuBlend) |
| 1 Stereo Mini Jack |
Stereo L/R |
0.5Vrms/22kO or over |
| 1RGB Input |
1 D-sub Mini 15pin |
RGBHV (Analogue) |
VGA, SVGA, XGA, SXGA (with Advanced
AccuBlend), UXGA (with Advanced AccuBlend) |
| RGB |
0.7Vp-p/75O |
| H/V Sync |
4.0Vp-p/TTL Polarity |
| Composite Sync |
4.0Vp-p/TTL Level Polarity |
| Sync on G |
0.3Vp-p/75O Negative Polarity |
| 1 stereo Mini Jack |
Stereo L/R |
0.5Vrms/22kO or over |
Component Input
(Sharing with RGB Input) |
1 D-sub Mini 15pin (Sharing with
RGB Input) |
Y |
1.0p-p/75O (with Sync) |
| Cb·Cr(Pb·Pr) |
0.7Vp-p/75O |
| 1125i(1080i), 750p(720p),
525p(480p), 525i(480i)/60Hz |
| 1080i/50Hz, Progressive
PAL-scan/50Hz |
| DVD Component Video Signal
(15kHz) |
| 1 stereo Mini Jack (Sharing with RGB Input) |
Stereo L/R |
0.5Vrms/22kO or over |
| 1Video Input |
1 RCA pin |
Composite Video |
NTSC/NTSC 4.43/PAL/PAL-N/PAL-M/PAL-60/SECAM |
| 1.0p-p/75O |
| 2 RCA pin |
Stereo L (MONO)/R |
0.5Vrms/22kO or over |
| 1S-Video Input |
1 Mini DIN-4pin |
Y |
1.0Vp-p/75O |
| C |
0.286Vp-p/75O
NEC
WT600 DMD Projectors |
| 2 RCA pin (Sharing with RGB Input) |
Stereo L (MONO)/R |
0.5Vrms/22kO or over |
| Output Terminals |
1RGB Output |
1 D-Sub Mini 15pin |
Output Analogue
Signal |
| 1AUDIO Output |
1 stereo Mini Jack |
| Control Terminals |
2USB Port |
1 A Type, 1 B Type |
| Remote Control Input |
1 stereo Mini Jack |
External Control |
| PC Control |
1 Mini DIN-8pin |
RS-232C |
| PC-Card Slots |
PCMCIA TypeII |
Built-in Speaker
NEC
WT600 DMD Projectors |
1W + 1W (Stereo)
NEC
WT600 DMD Projectors |
| Keystone Correction |
H max ± 5 degrees:V max -5
degrees |
| Environment |
Operational Temperatures |
41° to 95°F (5° to 35°C), 20
to 80%Humidity(Non-Condensing) |
| Storage Temperatures |
14° to 122°F (-10° to 50°C),
20 to 80%Humidity(Non-Condensing) |
| Power Requirement |
100 to 120V AC/200 to 240V AC,
50Hz/60Hz |
| Power Consumption |
290W(Lamp Normal Mode)/230W(Lamp
Eco Mode)/0.6W(Standby)/8W(Idle) |
| Input Current |
3.2A (100 to 120V AC)/1.6A(200
to 240V AC) |
| Quietness |
37dB (Lamp Nomal Mode), 32dB
(Lamp Eco Mode) |
| Regulations |
UL Approved (UL 1950, CSA-950) |
| Meets DOC Canada Class B
requirements |
| Meets FCC Class B requirements |
| Meets AS/NZS3548 Class B |
| Meets EMC Directive (EN55022,
EN55024, EN61000-3-2, EN61000-3-3) |
| Meets Low Voltage Directive
(EN60950, TUV GS Approved) |
| Dimensions(W x H x D) |
With the mirror cover open
(380mm x 313mm x 313mm (Not Including Protrusions) |
| With the mirror cover Closed
(380mm x 227mm x 296mm (Not Including Protrusions) |
Net Weight
NEC
WT600 DMD Projectors |
5.9kg
NEC
WT600 DMD Projectors |
NEC WT600 DMD Projectors
