| Processor |
| |
CPU |
32-bit
Motorola ColdFire® Microprocessor |
| |
Processing
Speed |
257
MIPS (Dhrystone 2.1 benchmark) |
| Memory |
| |
Onboard |
4MB
Flash, 32MB SDRAM, 256KB NVRAM |
| |
Expandable |
Compact
Flash slot up to 4 GB (accepts standard Type
II Compact Flash or IBM Microdrive®, not
included) |
| Operating
System |
| |
Real-time,
preemptive multi-threaded/multitasking
kernel; FAT32 file system with long names;
supports SIMPL™
Windows® and SIMPL+™ |
| Ethernet
Support - Crestron PRO2 Control System |
| |
With
C2ENET-1 |
10/100BaseT,
static IP or DHCP/DNS, SSL, autonegotiating,
full/half duplex TCP/IP, UDP/IP, SMTP,
built-in Web server and e-mail client;
supports Crestron e-Control
2 XPanel and RoomView
applications |
| |
With
C2ENET-2 |
All
above features plus: built-in firewall,
router, and network address translator (NAT) |
| Y-Bus |
| |
40
Mb/s parallel communications;
Internal backplane for integrated control
ports and Y-Bus expansion slots |
| |
COM
A - F |
(6)
DB9 male;
(6) Bidirectional RS-232/422/485 ports;
Up to 115.2K baud;
Hardware and software handshaking support;
Ports C-F support C2N-NPA8
Network Poll Accelerator |
| |
INFRARED-SERIAL
OUTPUT A - H |
(8)
2-pin 3.5mm detachable terminal blocks;
(8) IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5V) up to 115.2K
baud;
Individual signal generator per port,
allowing simultaneous firing of all ports.
Crestron PRO2 Control System. |
| |
I/O
Versiports 1 - 8 |
(1)
9-pin 3.5mm detachable terminal block;
(8) Digital input/output or analog input
ports (referenced to GND);
Digital Input: Rated for 0-24VDC, input
impedance 20K ohms, logic threshold 1.24VDC;
Digital Output: 250mA sync from maximum
24VDC, catch diodes for use with “real
world” loads;
Analog Input: Rated for 0-10VDC, protected
to 24VDC maximum, input impedance 20K ohms;
Programmable 5V, 2K ohms pull-up resistor
per pin |
| |
RELAY
OUTPUT 1 - 8 |
(2)
8-pin 3.5mm detachable terminal blocks;
(8) Normally open, isolated relays;
Rated 1A, 30V AC/DC;
MOV arc suppression across contacts |
| |
Expansion
Slots |
(3) Y-Bus
expansion slots;
Accept all Y-Bus control cards.
Crestron PRO2 Control System |
| Z-Bus |
| |
300
Mb/s parallel communications;
Backplane for Z-Bus expansion slots |
| |
Expansion
Slot |
(1)
Z-Bus expansion slot;
Accepts all Z-Bus control cards |
| Other
Connectors |
| |
COMPUTER |
(2) DB9
female;
Front and rear RS-232 computer console port |
| |
NET |
(1) 4-pin
5mm detachable terminal block;
Cresnet port, Master/Slave selectable;
Expandable via C2N-NPA8
Network Poll Accelerator |
| |
100-250V~2.3A
50/60 Hz |
(1) IEC
Socket;
Mates with removable power cord, included |
| Reset
Buttons |
| |
HW-R |
Hardware
reset (reboots the control system) |
| |
SW-R |
Software
reset (restarts the SIMPL program) |
| Menu
Buttons |
| |
FUNCTIONS |
(6) Up to 6
dynamically assigned functions based upon
current menu |
| |
MENU |
(1) Returns
the LCD display to the MAIN menu |
| |
∧,
∨ |
(2) Scrolls
up or down through any list displayed in the
LCD display |
| |
BKLT |
(1) Toggles
through 4 levels of backlight intensity for
the LCD display. Crestron PRO2 Control
System. |
| |
Refer
to the Operations Guide for additional menu
functions |
| LCD
Display |
| |
(2)
lines, (40) characters per line;
Reverse mode (yellow and black) backlit LCD;
Displays system information, configuration
menus, and custom programmable user
functions |
| LED
Indicators |
| |
PWR |
(1)
Indicated AC power supplied to unit |
| |
NET |
(1)
Indicates Cresnet bus activity |
| |
ERR |
(1)
Indicates a hardware or software error
condition |
| |
LNK
A |
(1)
Indicates a valid connection on LAN port A |
| |
ACT
A |
(1)
Indicates activity on LAN port A |
| |
LNK B |
(1)
Indicates a valid connection on LAN port B |
| |
ACT B |
(1)
Indicates activity on LAN port B |
| |
COM
A - F
(TXD, RXD, RTS, CTS) |
(24)
Indicate activity on each respective COM
port |
| |
IR-SERIAL
A - H |
(8)
Indicate activity on each respective IR/Serial
port |
| |
INPUT-OUTPUT
1 - 8 |
(8)
Indicate activity on each respective I/O
Versiport |
| |
RELAY 1 - 8 |
(8) Indicate
contact closure at each respective relay
port |
| |
SLOT 1 - 3 |
(3)
Illuminates to indicate presence of a card
in the respective expansion slot;
extinguishes momentarily to indicate
activity |
| Power
Requirements - Crestron Pro2 Control System - Houston, TX |
| |
Internal
Universal Power Supply |
2.4
Amps, 100-240 Volts AC, 50/60 Hz |
| |
Available
Cresnet Power |
50
Watts (shared with control card expansion
slots) |
| Environmental |
| |
Temperature |
41°
to 113°F (5° to 45°C) |
| |
Humidity |
10%
to 90% RH (non-condensing) |
| Enclosure |
| |
Black
metal, 2U 19” rack mountable (rack ears
included) |
| Dimensions |
| |
Height |
3.47 in
(8.81 cm) |
| |
Width |
19.0 in
(48.26 cm) with ears; 17.03 in (43.24 cm)
without ears |
| |
Depth |
9.69 in
(24.61 cm) |
| Weight |
| |
8.00
lb (3.62 kg) – with line cord. Crestron Pro2 Control System - Houston, TX |
