|
|
Crestron
Remote Control Systems
|
Crestron MP2
Audio/Video Switch
Low-cost complete room control
and audio/video switch solution
Crestron
MP2E
Low-Cost Complete Room Control and Audio/Video
Switch Solution |
|
Low-cost
complete room control and audio/video switch
solution. Includes 4 IR/serial ports, 2
RS-232/422/485 ports, 4 isolated relays, 4 input
ports, 1 IR receiver port, Cresnet port and 4MB
Flash memory, 4 x 2 video switch, 7 x 1 audio
switch w/volume control and parametric equalizer.
The
Crestron MP2E adds connectivity via a 10/100
Ethernet port featuring static/dynamic IP
addressing, built-in web server for help desk
functionality, POP3 email client, and full
compatibility with all e-Control Power
Applications.
- 4
IR/serial ports
- 2
RS-232/422/485 ports
- 4
low voltage relays
- 4
I/O Versiports
- 1
IR receiver input
- 10/100
Ethernet port
- Built-in
Web server for remote help desk/web browser
control
- DHCP/DNS
enabled, SSL (Secure Sockets Layer) enabled
- Cresnet
port
- Includes
PW-2410 power supply
- 4x2
video switch (auto-sensing)
- 7x1
audio switch
- Volume/bass/treble
control
- 6-band
graphic and parametric EQ
|
|
| Processor |
| |
CPU |
32-bit
Motorola 5407 ColdFire® Processor |
| |
Processing
Speed |
257
MIPS (Dhrystone 2.1 benchmark) |
| Memory |
| |
36
MB Total |
| Connectors
- Crestron MP2E Audio/Video Switch |
| |
COM |
(2)
DB9 for RS-232/422/485 |
| |
RELAYS |
(4)
normally open, isolated relays; each relay
is rated 1A, 30VAC/DC; MOV arc suppression
across contacts for use with "real
world" loads |
| |
INPUT |
(4)
programmable digital/analog inputs digital
inputs rated for 0-24VDC, 20K ohms input
impedance, logic threshold 1.25VDC; analog
inputs rated for 0-10VDC, protected to
24VDC maximum, 20K ohms input impedance;
programmable 2K ohms pullup resistor (per
pin, software reference to GND or closure
to GND) |
| |
IR
ports |
4
programmable simultaneous outputs for IR,
TTL Level RS-232 or serial interface;
signal (ws) and ground (G) pins; infrared
output up to 1.2MHz with individual UART
per port allowing simultaneous firing of
all ports |
| |
IR
Receiver |
3-position
mini-phoenix for use with CNXRMIRD. Used
to recognize RC-5 and Sanyo IR remote
controls. |
| |
Ethernet |
RJ45
for 10/100 BaseT Ethernet, dynamic/static
IP and full duplex TCP/IP, UDP/IP,
Built-In webserver, POP email client |
| |
Computer
Port |
1
RS-232 port,9-Pin DB9 for programming a PC |
| |
Cresnet
Port |
1
4-Pin male connector |
| |
Power |
1-jack
accepts 24VDC from PW-2420RU power supply
(included), passes power through to
CresNET port |
| Video
Switcher -
Crestron MP2E Audio/Video Switch |
| |
6BNC
connectors implement a 4 x 2 composite
video crosspoint or can be used as a 2 x 1
S-Video crosspoint (Y/C). All inputs have
video sensors built-in and are 75 ohm
terminated. Outputs are designed to drive
75 ohm devices |
| Audio
Switcher |
| |
8
Mini screw terminal connectors implement a
7 x 1 stereo audio crosspoint supporting
balanced and unbalanced audio in and out.
A built-in stereo volume, bass and treble
control is included on the output as well
as a 6-Band parametric equalizer with user
definable presets for all input sources. |
| Reset
Buttons
Crestron MP2E Audio/Video Switch
|
| |
HW-R |
Performs
physical reset of system |
| |
SW-R |
Restarts
SIMPL program |
| LED
Indicators |
| |
PWR |
Green
LED, indicates power supplied to the unit |
| |
NET |
Yellow
LED, indicates activity within the system |
| |
ERR |
Red
LED, indicates an error message is
available from the software feature
buttons |
| Power
Requirements |
| |
External
24VDC, 2.0A2, 24W+ power jack or Cresnet
connector; PW-2410RU Power Supply included |
| Additional
Features -
Crestron MP2E Audio/Video Switch |
| |
RoomView™
Software |
A
great compliment to the Crestron MP2E,
RoomView software provides diagnostics,
scheduling and equipment status in
individual rooms or an entire facility.
RoomView provides: 1) Room Power (view
power status facility wide, manually turn
on/off power to any room, schedule room
power on/off for individual rooms), 2)
Real-time projector lamp status, 3)
Receive and respond to dynamic help
requests, 4) Quick-Link connect to
2-Series control system web serving for
remote help desk functions, and 5)Monitor
status of control system. |
|
|
Specifications
subject to change without notice. |
|
|
|
|
|
|
Call
Toll-Free 8:00-5:00 CST Mon-Fri
Audio
Visual Technologies Group
4910
Wright Rd #100
Stafford, TX 77477
www.avtg.com
|
