| Channels |
| |
7
channels |
| Input
Impedance |
| |
28K
ohms |
| Bandwidth
-3dB |
| |
3Hz
to 50KHz |
| Frequency
Response @ 1W 8ohm |
| |
Flat
+0, -0.1dB from 20Hz to 20KHz |
| Total
Harmonic Distortion (THD) @ full power |
| |
0.03%
or less |
| IHF
I.M. Distortion |
| |
0.01%
or less |
| SMPTE
I.M. Distortion |
| |
0.03%
or less |
| Dynamic
Headroom |
| |
2dB
or more |
| Signal/Noise
Ratio (S/N) "A" Weighted |
| |
>110dB |
Gain
Crestron
CNAMPX-7X200 Digital Home Theater Surround
Sound Amplifier |
| |
28dB |
| Damping
Factor |
| |
>1000 |
| Channel
Separation over full bandwidth |
| |
>100dB |
| Environmental
Temperature Range |
| |
41-104°F
(5-40°C) |
| Environmental
Humidity |
| |
10%
to 90% RH (non-condensing) |
| Power
Requirements |
| |
Input |
120VAC
+/-10%, 60Hz, 2400W |
| |
Cresnet
Power |
24VDC
@ 0.125A, 3W |
| Output
Power |
| |
8
ohm load |
200W/channel.
All channels driven, 20Hz to 20KHz, at
rated THD |
| |
4
ohm load |
300W/channel |
| Rear
Indicators |
| |
PWR |
Green
LED is illuminated when 24VDC via the
Cresnet connector is supplied to the
CNAMPX-7x200. |
| |
NET |
Yellow
LED indicates that the SIMPL program
currently loaded in the control system has
a network device defined at the same NET
ID code as the CNAMPX-7x200. LED flashes
when communications with the Cresent
system and the CNAMPX-7x200 is occurring. |
| |
OVERRIDE
Button & Indicator |
OVERRIDE
button is used to activate AC power and
activate all room outputs. Buttons
functions only when 24VDC is applied to
the NET connector. Red LED illuminates
when the OVERRIDE is activated. |
Rear
Ports
Crestron
CNAMPX-7X200 digital surround sound amplifier |
| |
NET |
The
4-pin network connector is used to connect
the CNAMPX-7x200 to the Cresnet system. |
| |
Power
Connectors and Fuse Compartment |
The
power connector provides AC operating
power to the CNAMPX-7x200 via the supplied
power cord. The fuse electrically protects
the internal circuitry from power
overloads and is located (a spare fuse is
included) within the compartment above the
power connector. |
| |
AUDIO
INPUTS |
7
single-ended line level inputs utilize
gold-plated RCA jacks |
| |
SPEAKER
OUTPUTS |
The
7 speaker output terminals are multi-way
binding post type. Each post is
gold-plated and accepts bare wire, banana
plugs, or spade lugs. |
| Dimensions |
| |
7.70"
/ 19.56 cm (H)x
19.00" / 48.26 cm (W)x
18.88" / 47.95 cm (D) |
| Weight |
| |
94.4lbs
(42.48 kg) |
