Crestron Control Systems
Crestron AV2 control system systems

Crestron AV2 control system systems

Crestron AV2 Control System

The Crestron AV2 Control System is an economical version of the PRO2, providing all of the features and performance of the PRO2 without the front panel LCD display and pushbuttons. The Crestron AV2 Control System also ships standard without Y-Bus expansion slots. As an option, three Y-Bus expansion slots may be added via the CAGE2 3-Card Expansion Cage accessory (sold separately).

The Crestron AV2 Control System is perfect for medium to large-scale commercial and residential control applications. Six built-in COM ports, eight IR/Serial ports, eight I/O Versiports, and eight isolated relays provide the essential interface for control of numerous devices including video projectors, plasma displays, switchers, VCRs, DVD players, screens, lifts, and much more. Additional control ports and other interfaces like MIDI, DTMF and digital audio processing may be added by installing up to three Y-Bus control cards (requires CAGE2 3-Card Expansion Cage accessory; sold separately).

Native to the Crestron AV2 Control System, secure Ethernet connectivity and full e-Control®2 XPanel support are enabled through the addition of any Crestron Z-Bus Ethernet card. A memory card slot accessible on the rear panel allows for easy expansion of the AV2's internal memory by up to 4 GB using any Type II Compact Flash memory card or IBM Microdrive® hard disk drive.

The AV2 features a built-in power supply. Power is available through the AV2's Cresnet port to support external Cresnet devices including touchpanels, keypads and expansion modules.

   Crestron AV2 Control Systems

Processor
  CPU 32-bit Motorola ColdFire® Microprocessor
  Processing Speed 257 MIPS (Dhrystone 2.1 benchmark)
Memory
  Onboard 4MB Flash, 32MB SDRAM, 256KB NVRAM
  Expandable Compact Flash slot up to 4 GB (accepts standard Type II Compact Flash or IBM Microdrive®, not included)
Operating System
  Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+™
Ethernet Support 
Crestron AV2 Control System
  With C2ENET-1 10/100BaseT, static IP or DHCP/DNS, SSL, autonegotiating, full/half duplex TCP/IP, UDP/IP, SMTP, built-in Web server and e-mail client; supports Crestron e-Control 2 XPanel and RoomView applications
  With C2ENET-2 All above features plus: built-in firewall, router, and network address translator (NAT)
Y-Bus
Crestron AV2 Control System
  40 Mb/s parallel communications;
Internal backplane for integrated control ports and Y-Bus expansion slots
  COM A - F (6) DB9 male;
(6) Bidirectional RS-232/422/485 ports;
Up to 115.2K baud;
Hardware and software handshaking support;
Ports C-F support C2N-NPA8 Network Poll Accelerator
  INFRARED-SERIAL OUTPUT A - H (8) 2-pin 3.5mm detachable terminal blocks;
(8) IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5V) up to 115.2K baud;
Individual signal generator per port, allowing simultaneous firing of all ports
  I/O Versiports 1 - 8 (1) 9-pin 3.5mm detachable terminal block;
(8) Digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24VDC, input impedance 20K ohms, logic threshold 1.24VDC;
Digital Output: 250mA sync from maximum 24VDC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10VDC, protected to 24VDC maximum, input impedance 20K ohms;
Programmable 5V, 2K ohms pull-up resistor per pin
  RELAY OUTPUT 1 - 8 (2) 8-pin 3.5mm detachable terminal blocks;
(8) Normally open, isolated relays;
Rated 1A, 30V AC/DC;
MOV arc suppression across contacts
  Expansion Slots (3) Y-Bus expansion slots (Requires CAGE2 accessory, sold separately);
Accept all Y-Bus control cards
Z-Bus
Crestron AV2 Control System
  300 Mb/s parallel communications;
Backplane for Z-Bus expansion slots
  Expansion Slot (1) Z-Bus expansion slot;
Accepts all Z-Bus control cards
Other Connectors
  COMPUTER (2) DB9 female;
Front and rear RS-232 computer console port
  NET (1) 4-pin 5mm detachable terminal block;
Cresnet port, Master/Slave selectable;
Expandable via C2N-NPA8 Network Poll Accelerator
  100-250V~2.3A
50/60 Hz
(1) IEC Socket;
Mates with removable power cord, included
Reset Buttons
  HW-R Hardware reset (reboots the control system)
  SW-R Software reset (restarts the SIMPL program)
LED Indicators
Crestron AV2 Control System
  PWR (1) Indicated AC power supplied to unit
  NET (1) Indicates Cresnet bus activity
  ERR (1) Indicates a hardware or software error condition
  LNK A (1) Indicates a valid connection on LAN port A
  ACT A (1) Indicates activity on LAN port A
  LNK B (1) Indicates a valid connection on LAN port B
  ACT B (1) Indicates activity on LAN port B
Power Requirements
  Internal Universal Power Supply 2.4 Amps, 100-240 Volts AC, 50/60 Hz
  Available Cresnet Power 50 Watts (shared with control card expansion slots)
Environmental
  Temperature 41° to 113°F (5° to 45°C)
  Humidity 10% to 90% RH (non-condensing)
Enclosure
  Black metal, 2U 19” rack mountable (rack ears included)
Dimensions
  Height 3.47 in (8.81 cm)
  Width 19.0 in (48.26 cm) with ears; 17.03 in (43.24 cm) without ears
  Depth 9.69 in (24.61 cm)
Weight
  7.10 lb (3.22 kg) – with line cord

 

Call Toll-Free 8:00-5:00 CST Mon-Fri

Crestron AV2 control system systems

Audio Visual Technologies Group
4910 Wright Rd #100
Stafford, TX 77477

www.avtg.com

 

Crestron AV2 Control Systems

Home | Products | Services | New Products | Contact Us | Find Us